Sodium Nitrite CAS 7632-00-0: TDS Explained
A sodium nitrite technical data sheet should be read as a set of specifications, not just a purity claim. Compare assay, moisture, sodium nitrate, chloride and water-insoluble matter with the specification agreed for your order. The product is identified by CAS 7632-00-0 and the formula NaNO₂. [1]
Key takeaways
- Identify sodium nitrite by CAS 7632-00-0 and NaNO₂ before comparing documents.
- The published minimum assay is 99.0%; the water-insoluble limit is 0.05% maximum.
- The 0.04% water-insoluble result is a published reference, not a result for your shipment.
- Agree the purchase specification and request the COA for the actual batch.
“CAS Registry Number: 7632-00-0”
What is the difference between a TDS, SDS and COA?
A TDS defines specifications, an SDS explains hazards, and a COA reports results for an identified batch.
A technical data sheet (TDS) describes product specifications. A safety data sheet (SDS) provides safety information for the applicable product. A certificate of analysis (COA) records results associated with an identified batch. Check the product identity, grade, batch reference and test methods across the documents; a website table is not a shipment certificate.
The purchase specification and batch COA serve different purposes. Agree the required limits before placing an order, then compare the batch results with those limits. A reference result does not replace either document.
OSHA Appendix D lists identification and hazard information among the required SDS sections in the United States. [2]
How should buyers read the five specification parameters?
Compare all five parameters against the agreed limits using the same units and test basis.
Assay states the reported sodium nitrite content. Confirm the analytical method and reporting basis before comparing suppliers. The published minimum is 99.0%; a quoted purity alone does not establish suitability for your application.
Moisture describes the reported water content, while the sodium nitrate entry identifies a separately reported component. Chloride is expressed as NaCl in this table: preserve that reporting basis when comparing values. Water-insoluble matter is a separate specification; do not infer it from assay or appearance.
Ask for clarification if the method, units or reporting basis is missing. Do not simply add percentages or treat figures from different test bases as a complete composition. Application suitability and equipment compatibility require a separate assessment.
What are the published specifications and reference results?
The table separates specification limits from published reference results. It does not certify a shipment.
| Parameter | Specification | Published reference result |
|---|---|---|
| Sodium nitrite | ≥ 99.0% | 99.00% |
| Moisture | ≤ 1.4% | 1.22% |
| Sodium nitrate | ≤ 0.80% | 0.66% |
| Chloride (as NaCl) | ≤ 0.17% | 0.15% |
| Water-insoluble matter | ≤ 0.05% | 0.04% |
Source: Boteng product information, with the water-insoluble result corrected and confirmed by Boteng on 21 October 2026. These values are reference information, not a batch certificate.
What does the 0.04% water-insoluble result mean?
The 0.04% value is a published reference result; 0.05% is the maximum specification limit.
Boteng has confirmed the published water-insoluble result as 0.04%. The specification limit remains 0.05% maximum. These are different fields: one is a limit, the other a reference result.
The reference result is not a verified average of recent production, a guaranteed future batch value or a substitute for a COA. Request the COA for the actual batch and compare it with the specification agreed for that order.
What documents should be checked on receipt?
Check the product identity, batch number, COA and applicable SDS before acceptance.
Before acceptance, match the product name, CAS number and batch identification on the documents and packaging. Check that the COA identifies the batch and provides the results needed by your quality team.
Have trained personnel follow the applicable SDS and approved site procedures for sampling and inspection. Packaging condition and appearance can help identify discrepancies, but cannot establish purity or fitness for use.
If a document or result is inconsistent, record the discrepancy and contact the supplier before acceptance. Have your quality team assess the issue against the purchase specification; avoid treating a general website value as shipment evidence.
What should a sodium nitrite quotation request include?
Include the product, application, specification, quantity, packaging and destination.
Provide sodium nitrite / CAS 7632-00-0, the intended application, required specification, quantity, packaging preference and destination. State any specific limits, test methods or documentation languages you require.
Ask Boteng to confirm the applicable grade, current specification, document availability and delivery terms. The website does not establish a fixed lead time, guaranteed document language or suitability for every application.
Frequently asked questions
What is the CAS number of sodium nitrite?
7632-00-0. Confirm that the chemical name, formula and identification on the supplier documents are consistent.
Does a reference result guarantee my shipment?
No. Request the batch-specific COA and compare it with the agreed specification.
Can I request a TDS, SDS or specimen COA?
Contact Boteng with the product, intended use and document requirements. Ask the team to confirm which documents are available for the relevant product and batch.
Sources and product documents
Request specifications or a quotation →
About the publisher and this guide
Weifang Boteng Chemical Co., Ltd.
This purchasing guide is published by Weifang Boteng Chemical Co., Ltd., the supplier identified on this website. It explains the company’s published sodium nitrite specifications and how to request supporting documents. It is supplier-authored information; no independent laboratory review is claimed.
Editorial basis and corrections
The table reproduces Boteng’s published product information. The water-insoluble reference result was corrected to 0.04% following confirmation by Boteng on 21 October 2026. This guide distinguishes specification limits from reference results. For a discrepancy, quote the page URL and parameter when contacting Boteng. Batch acceptance must use the agreed specification and batch-specific documentation.